Loading...
Serving Perris, CA and surrounding areas. (951) 418-3690
A permanent asphalt speed bump slows traffic on your driveway or parking lot starting the day after installation - and holds its shape through Inland Empire summers.
Speed bump installation in Perris means a crew shapes and compacts hot-mix asphalt directly into your existing pavement surface, creating a permanent raised section that forces drivers to slow down - most single-bump residential jobs finish within a few hours and you can drive on it within a day.
A well-built asphalt speed bump becomes part of the pavement. The crew preps the existing surface so the new asphalt bonds properly, builds the bump in layers, and finishes with bright yellow or white stripes so drivers can see it clearly. In Perris, where summer temperatures regularly push past 100 degrees F, the asphalt mix matters - a heat-stable formulation holds its shape under daily tire pressure through July and August. If the underlying surface needs attention before a bump is added, pairing this with asphalt sealcoating or a surface prep service first gives you a bump that performs from day one.
Speed bumps on private driveways and parking lots are the most common residential jobs. A bump on a public street is a different situation entirely - that requires going through the California Department of Transportation or the city's public works department. We work on private property and can help you identify which category your surface falls into if you are unsure.
If cars or trucks regularly speed through your driveway, parking lot, or private road, a speed bump is the most direct physical solution. Signage alone rarely changes behavior - a bump enforces the limit without any ongoing effort on your part.
If kids play near a driveway or parking area, or residents walk through a shared lot, the risk of a fast-moving vehicle is real. In Perris's newer family communities, shared driveways and private roads often double as play and walking areas, making traffic calming a genuine safety need.
If your board has discussed speeding on private community roads or received formal complaints, a speed bump is often the most cost-effective and enforceable solution. It is far more reliable than signage alone.
If you are planning to repave or resurface a driveway or parking lot, adding a speed bump at the same time is the most efficient and cost-effective moment. The crew is already there, and the bump integrates cleanly into fresh asphalt.
We install asphalt speed bumps on residential driveways, private parking lots, and HOA-maintained roads throughout Perris and the surrounding Inland Empire. For property owners planning a larger paving project, this is a natural add-on - if you are already having a driveway or lot resurfaced, the crew is on site and the surface is ready, making it the most cost-effective time to add a bump. A full parking lot paving project is an ideal moment to incorporate traffic calming from the start.
For properties that need traffic control without full repaving, we can install a bump on top of a sound existing surface - no full tearout required. We assess the existing pavement condition first, because a speed bump on a failing base will not hold. If the surface underneath needs work, we will tell you honestly and can handle that prep as part of the same job. For HOA-governed roads where the community manages a shared network of sealcoated pavement, a speed bump fits naturally into the same maintenance visit.
Best for homeowners who want to slow traffic at the entry to a shared or long private driveway.
Suits commercial property owners and property managers who need traffic calming across a larger paved area.
Ideal for planned communities in Perris where the HOA manages private roads and needs consistent, visible traffic control.
Most cost-effective option when a driveway or lot is already being paved or resurfaced - bump is integrated into fresh asphalt at no extra mobilization cost.
Added to any bump installation - clear yellow or white stripes make the bump visible day and night.
Perris has grown quickly, and many of the newer planned communities in the area have shared driveways, private roads, and parking areas that carry more daily traffic than they were originally designed for. HOA boards across Perris regularly receive complaints about speeding on private roads, and a speed bump is typically the most straightforward fix - one that works around the clock without any enforcement. The clay-heavy soils in the Perris Valley also matter here: if the base beneath your pavement has been shifting, a speed bump installed on top of an unstable surface will crack and separate. We check the base before we build.
We install speed bumps throughout the Perris area and into neighboring communities including Menifee and Lake Elsinore, where similar community layouts and climate conditions create the same traffic calming needs. Scheduling installation during cooler morning hours in summer - rather than peak afternoon heat - gives the asphalt the best conditions for clean compaction and a long-lasting finish.
We respond within 1 business day to schedule a site visit. A contractor looks at the surface condition, width of the lane, and existing pavement to give you an accurate quote - not a phone estimate based on nothing.
You get a written quote covering materials, labor, surface prep, and paint striping. Before you sign, we confirm whether your property requires HOA approval or any permit from the city or Riverside County.
The crew marks the bump location, preps the existing surface for bonding, and builds the bump in layers using hot-mix asphalt. The area is blocked off while the material is hot - usually a few hours for a single bump.
After the asphalt cools, yellow or white paint stripes are applied so the bump is clearly visible. We tell you the specific window for driving on it - typically within 24 hours for passenger vehicles.
We respond within 1 business day, visit your site to confirm the approach, and give you a written quote before any work is scheduled.
(951) 418-3690We use asphalt formulated for sustained high heat - a specific requirement in Perris, where summer temperatures regularly climb past 100 degrees F. A speed bump built with the wrong mix will rut and deform. Ours will not.
Every installation includes a written scope of work that specifies the mix type, bump dimensions, and paint specifications. We stand behind our workmanship - if the bump cracks or separates within the warranty period, we come back and fix it.
We work in planned communities across Perris and know how HOA approval processes work. We will tell you upfront whether you need written approval before we schedule the job, so you are not caught off guard.
You can verify our license directly through the California Contractors State License Board. We carry liability insurance and workers compensation - ask for our current certificate before work begins.
A speed bump is a small job, but the details matter - mix quality, base condition, stripe visibility. We take those details seriously because a bump that fails in the first summer reflects on us, and we are local enough to care.
Protect the surface around your new speed bump with a fresh seal coat - often done on the same visit to save on mobilization.
Learn MoreIf your lot needs full repaving, add speed bumps during the project for the most seamless and cost-effective result.
Learn MoreOne visit, a few hours of work, and your driveway or lot has permanent, visible traffic control - call now and we will schedule your free on-site assessment.